GNU Mach does not support SATA disk drives (/dev/sda etc. in GNU/Linux) natively, so using device:sd0s1 will not work, sd* devices are for SCSI drives only. The only way to get those drives to work is to put them into compatibility mode in the BIOS, if such an option exists. GNU Mach will then recognize them as hda etc.

Run vmstat to see memory and swap usage.

You need to disable PrivilegeSeparation in /etc/ssh/sshd_options. Also make sure you have /dev/random, see below.

If ps hangs, try ps -M which might still work.

The kernel logs are written to /dev/klog. Run cat /dev/klog > foo as root and hit ctrl+c after a few seconds to catch the logs. You can do this only once and do not do this in single-user mode (where ctrl+c does not work).

You need to run dpkg-reconfigure xserver-common and select Anybody for starting X as there is no way to detect console users currently.

There is no /etc/mtab, so just running df will yield an error. Pass df a path like df / or df ./ to see the disk usage of that particular file system.

Edit /etc/default/hurd-console to configure the Hurd console and enable it on bootup. See console for further information about the Hurd console.

Please try to reproduce bugs which are not obviously Hurd-specific on Debian GNU/Linux and then file them there.

If you find a genuine issue in Debian GNU/Hurd, please file it in our Alioth bug tracker at http://alioth.debian.org/tracker/?atid=411594&group_id=30628&func=browse If you find a bug in the Hurd or GNU Mach themselves, either file a bug against the respective Debian packages, or directly at http://savannah.gnu.org/bugs/?group=hurd

If you want to use the apt-get source facility, make sure that /etc/apt/sources.list contains a line like

deb-src http://ftp.de.debian.org/debian unstable main

... replacing de with your homeland's code.

There is no random device by default as no secure implementation has been finished yet. An easy (but very insecure) work-around is to copy a binary file like /bin/bash to /dev/random and /dev/urandom.

To get debugging information for glibc, you need to install the libc0.3-dbg package. At the place GDB looks for debugging symbols by default (/usr/lib/debug/lib/), Debian's libc0.3-dbg stores only frame unwind information. If you want to step into glibc while debugging, you need to add LD_LIBRARY_PATH=/usr/lib/debug to GDB's environment. If that still does not work, try LD_PRELOAD=/usr/lib/debug/libc.so.0.3 instead. You can add to GDB's environment via set env FOO bar from the GDB command line.

It seems that this is no longer needed with the Debian glibc 2.5 packages, but I may as well be wrong. Have to check that again.

In order to debug translators and being able to step into glibc during it, you need the hurd-dbg and libc0.3-dbg packages installed. Then start the translator like settrans -P /foo /usr/bin/env LD\_LIBRARY\_PATH=/usr/lib/debug /hurd/foofs. The -P option will make it pause and you will be able to attach GDB to the process.

Is starting the translator like this really needed?

The 2 GiB limit has been removed in Debian GNU/Hurd.

If you get the error bad hypermeta data when trying to mount an ext3 partition from GNU/Linux, that is usually because the file system has not been unmounted cleanly (maybe GNU/Linux got suspended to disk) and the Hurd cannot mount it as ext2 without checking. Either boot back into GNU/Linux and unmount it or you can try to run fsck.ext3 from GNU/Hurd directly.

You can add a shell script umount so that apt can automatically unmount cdroms.

#!/bin/sh
# Filename: /usr/bin/umount

settrans -fg "$@"

Give executable permission to the script.

# chmod +x /usr/bin/umount

In /etc/fstab add a trailing / after cdrom like /cdrom/ since apt uses a traing /.

GNU Mach does not cope well with lots of memory. Newer versions of the Debian gnumach package will limit themselves to around 1 GiB of memory. If you have an older version, or still experience problems with vmstat (see above) reported much less memory than you have, the best is to limit the memory it can see via GRUB's upppermem feature. Add uppermem 786432 to GRUB's Hurd entry in menu.lst.